If you would like to make sure a group of Homestead elements are align with each other in a certain way (e.g. left, middle, top), you will want to use the "Align" feature in the SiteBuilder.

Here's how to find and use the "Align" feature:

1. Login and open the desired web page.

2. Select the desired multiple elements to align using one of the methods described below. In order to use the "Align" feature you must select at least two elements.

• Click on one element, hold down the "ctrl" button, and continue to select elements.
• You can click and drag the mouse to select multiple elements using the dotted box. Shown below:

3. Once your elements are selected:

Select the "Align" feature in the file menu along the top of the Sitebuilder under "Edit", and choose your type of alignment

Note:

• "Left","Right","Top","Bottom" - the Align feature uses the element that is the furthest of whatever alignment is selected. In other words, if you choose "Left", then the element that is the furthest left of the other elements will be used to align the elements:
  

  

  In the example above, the green square is the furthest left and all the elements will move to same "left" position of the green square.
  

  

• "Middle" and "Center"- the Align feature uses the greatest distance between the two furthest selected elements to determine the "middle" (up and down distance) and "center" (left and right distance), and moves all elements to that "middle" or "center" position.
  • In the example below, the "Middle" align is chosen and the distance from the green and blue square is calculated.
  
  

  

  • All the squares (green, red, blue) are moved to the "middle" position

Note:
• The "Align" feature does not work with actual text, only elements. It can be used with Text elements, but not with the actual text inside the element.
• Once you "Align" elements, they cannot be "unaligned" all at once, you will have to move the elements one at a time.
• Please be careful in choosing an align that will not cause elements to combine into each other, if this happens, do not save your changes and re-open the page.
• Create a "test" page to practice using the feature.